Related Equipment
Guidetti
Sincro
415
The Guidetti Sincro 950 is the largest granulator in the Sincro range, built for plants processing cable as a continuous production stream rather than a side activity. It recovers copper and aluminum from cable and radiators by dry separation at up to 1,980 lb/h (900 kg/h). It is CE certified. Engineered Recycling Systems supplies, installs and supports it from Atlanta.
It is the machine a plant moves to when the granulator has become the bottleneck. Telecom cable, automotive harnesses, HVAC radiators and mixed industrial scrap all run through it, flexible and rigid conductors together, without pre-sorting.
Below it sit the Sincro 530 and the compact Sincro 415, and the Sincro Mill Line covers the lower end in the tightest footprint in the range.
Four stages in one machine: a blade granulator, a zig-zag separator, a turbo mill and a dry densimetric table. Thick metal such as plugs and connectors comes out early in the cycle. Thin wire is reduced further so the separation stage has something it can actually split.
That sequence is the reason the output is clean rather than merely small. A granulator on its own gives mixed fragment; it is the mill and the table behind it that turn fragment into saleable copper.
The 950 separates metal from insulation — plastic, rubber or paper — and it also separates copper from aluminum, which matters on radiator work where the two arrive joined.
At this throughput the value of that split compounds quickly. A mixed copper and aluminum fraction is discounted every time it is sold, and at several hundred kilos an hour the discount is not a rounding error.
Purity is set by the feed as much as by the machine. Cable of one construction, fed steadily, gives a cleaner split than the same tonnage arriving as a mixed pile.
There is no water in the process and no chemical treatment. Nothing to permit, nothing to treat, nothing to dispose of. The separation is done on density by air and vibration.
The machine is soundproofed and has dust filtration built in, so it can run inside a working building rather than in a shed at the back of the yard — which at this size is usually a planning requirement rather than a preference.
Manual or automatic by conveyor. At the top of its range the feed is what decides whether the rated figure is ever reached, so most installations put a PMG pre-shredder in front and feed the granulator steadily rather than in surges.
ERS fits dosing conveyors, magnetic separation and dust extraction around it so the stages balance. A granulator starved for ten minutes an hour is a smaller machine than the one on the invoice.
Graded copper or aluminum, and a plastic fraction. Where the tailings still carry fine copper, a Reco Mill recovers it rather than letting it leave with the plastic.
At this volume the fines matter more, not less. A fraction of a percent of copper leaving with the plastic is a real sum over a year, and it is the easiest money in the whole line to recover.
The mill is extractable, which on a machine running a full shift is the difference between a blade change and a strip-down. Sealed bearings, reinforced housings and a programmable PLC suit continuous duty with minimal supervision.
Blades and screens are consumables, and what they really cost is the time the line stands still while they are changed. An hour saved on a changeover at this capacity is an hour of production.
Guidetti gives the 950 as 1,760 to 1,980 lb/h (800 to 900 kg/h), and like every figure on a granulator it depends on what is being fed. Fine telecom cable and heavy armored cable do not run at the same rate through the same blades, and the number to plan around is the sustained one on the plant's own material.
With the cable. ERS looks at what arrives, how it is constructed, what purity the buyer wants and the space available. Material can be run at the ERS test facility in Atlanta before anything is specified, and at this capacity that step settles arguments no specification sheet can.
Every machine ERS supplies is installed, commissioned and supported by ERS, with spare parts and service from Atlanta. The full Guidetti range and the wider copper wire and cable systems sit alongside it, within the ERS metals processing lineup.
Talk to ERS about what you are feeding and what purity you need to sell at.
Hit enter to search or ESC to close