Not Density How the Material Behaves
HSCS material separation systems from ERS deliver high-efficiency sorting of ASR, slag, plastics and waste, using advanced rotor technology for clean, sustainable processing. HSCS stands for High-Speed Cleaning Separator, a system that uses the natural behavior and physical properties of materials, rather than density or grain size alone, to achieve precise, high-purity separation across diverse recycling streams.
A Different Basis for Separating
Conventional mechanical sorting asks one question: how heavy is it, or how big. That works until two materials in the stream happen to share a density, which in shredder residue and slag they frequently do. HSCS asks a different question, how does this material respond to airflow, agitation and directional force inside a controlled rotor environment.
The practical result is that fractions a density table leaves mixed come out separated. Recyclers get cleaner fractions, better downstream performance and higher overall recovery, and the stages after it have less work to do.
What It Handles
The system is engineered for a wide range of input: ASR, ASR fines, waste, plastics and slag. The rotor mechanism performs in demanding applications such as slag treatment, where clean separation decides whether downstream refining is economic at all.
Whether the job is separating metal fractions from residuals or films from heavier material, output is consistent and high-purity at low energy consumption. That combination is what makes it worth installing rather than adding another conventional stage.
Adjustable While Running
Adaptability is the core advantage. Operators make fast adjustments during operation, so the system responds to changing material and processing requirements rather than needing a stop and a reset. In a stream whose composition changes load to load, that is the difference between a specified recovery rate and an achieved one.
The modular design integrates into existing workflows, which suits facilities that already have a line and need the separation stage improved rather than the plant rebuilt.
Where It Sits in a Line
HSCS is a separation stage, not a whole plant. Ahead of it sit pre-shredders, shredders and mills and hammer mills, because separation can only work on material that has been liberated. Alongside it run magnetic separation, eddy current and density separation tables, each doing the part it does best.
Conveying and pneumatic transport move material between stages, dust collection handles the air, and baling finishes the recovered fractions. The whole chain is described under metals processing and scrap metal recycling systems and the equipment range under metals processing equipment.
Which Streams It Serves
Shredder light fraction and midlings and tailings are the obvious ones, since both are where conventional separation gives up. It also handles the difficult middle in electronics recycling, wire and cable and EV material lines.
Prove It On Your Own Material First
A separator that works on one plant's ASR may behave differently on another's, because no two shredders produce the same residue. The ERS Test Facility in Atlanta exists so you never have to take a recovery figure on trust. Send a sample and we will run it through an ERS process flow, then show you the separation, the purity and the throughput you can expect, with the fractions in front of you.
On a stream this variable that test is not a formality, it is what decides whether HSCS is the right stage for your material at all.
Support After Commissioning
A separator is worth what it does in year five. ERS keeps a stocked warehouse and supports every installation it builds, through to spare parts and service, rotor components, wear parts and screens without a lead time measured in months. Installed systems are written up under project news and system updates.
Next Steps for Your HSCS Separation Project
If you are evaluating HSCS material separation systems, send your material, your current separation stage and your throughput target through the contact form. Better still, send a sample and we will run it.
Next Steps for Your HSCS Separation Project
If you’re evaluating HSCS material separation systems or planning to upgrade your current workflow, our engineering team is ready to support you. You can reach out through our contact form to request a quote or schedule a consultation with an ERS engineer. If you want to understand how your material performs in a real system, you can also send material for testing to our facility, where our team will process it through an ERS‑engineered line and provide documented recovery results to support your planning.