Guidetti Sincro Eko Line

Granulators for recycling electric wires & cables

Sincro Eko Line Cable Granulation in a Small Footprint

The Guidetti Sincro Eko Line recovers copper and aluminum from cable in the smallest footprint in the range. Granulation and dry separation in one machine, sized for plants where floor space is the constraint rather than throughput. Engineered Recycling Systems supplies and integrates it from Atlanta.

The five models

The Sincro Eko 215 handles up to 145 lb/h (65 kg/h) on a 4.8 HP (3.6 kW) motor in a footprint of 42 x 32 x 60 inches (1060 x 810 x 1515 mm) — small enough to stand against a wall in a workshop. The Eko 315 lifts that to 285 lb/h (130 kg/h) at 8.2 HP (6.1 kW).

The Eko 415 reaches 440 lb/h (200 kg/h) at 12.5 HP (9.3 kW), the Eko 530 up to 880 lb/h (400 kg/h) at 22.5 HP (16.8 kW), and the Eko 950 tops the range at 1,760 to 1,980 lb/h (800 to 900 kg/h) with 62 HP (46 kW) installed. All five are CE certified and take manual or automated feeding.

Note the power figures against the full Sincro Line: the Eko models draw less for comparable throughput, which on a machine running every shift is a real operating difference rather than a specification one.

How it separates

Cable is granulated to liberate the metal from the insulation, then dry densimetric tables and air fans split the two by density. No water, no effluent, no drying stage — which is usually what makes an installation possible in a building that was never designed for it.

Flexible and rigid conductor both run without pre-selection. For a plant taking mixed cable off a yard or from several customers, that removes a sorting step that would otherwise need a person.

Where the footprint matters

Most of these machines go into buildings that are already full. The question is rarely whether the plant can process more cable — it is whether there is anywhere to put the equipment that would let it.

An ultra-compact line also changes who can run one. A fabricator or installer generating its own cable offcuts can justify in-house wire scrap recovery at this size where a full line would never pay back.

Maintenance and running

Each unit has an extractable mill, so blade replacement is quick and the machine is not stripped down for routine work. On a small line, downtime is the whole plant rather than one stage, which makes access worth more than it looks on paper.

The housing is soundproofed, which matters when the machine sits close to where people work rather than in a dedicated hall. Integrated dust filtration keeps airborne contamination down and supports clean air standards.

Optional rotary valves, dosing conveyors and dust collection let each installation be tailored to the material and the building.

Where it sits in a line

Ahead of it, a PMG pre-shredder opens reels and bundles so the granulator sees a feed it can take — the PMG 400 is the usual partner at this scale.

Behind it, dry separation tables lift the product grade further, and a Reco Mill line recovers copper from the plastic tailings. Magnetic separation takes out ferrous contamination.

Where the feed is dirtier, the Sincro Mill line is built for it. Where throughput is the priority rather than space, the standard Sincro Line is the better answer.

What runs through it

Insulated copper and aluminum cable. Telecom cable, automotive harness, building wire, production offcuts and mixed industrial scrap.

Shredder wire from auto shredding behaves differently — short, tangled, contaminated — and normally wants a line specified around that rather than around clean cable.

How a project starts

With a sample and a layout. Cable varies enormously between sources, and on a compact installation the space available shapes the answer as much as the material does. Material can be run at the ERS test facility in Atlanta before anything is committed.

Every line ERS supplies is installed, commissioned and supported by ERS, with spare parts and service from Atlanta.

Talk to ERS about the cable you are processing and the space you have for it.

Guidetti Sincro 215
Guidetti Sincro 215 EKO utilized by Engineered Recycling Systems — ultra-compact granulator designed for processing rigid and flexible copper and aluminum cables, featuring manual or automated feeding, dry separation technology, and energy-efficient perfo
Guidetti Sincro 315
Guidetti Sincro 315 utilized by Engineered Recycling Systems — compact cable granulator designed for processing rigid and flexible copper and aluminum cables, featuring zigzag separator, turbo mill, and dry separation table for high-purity metal recovery
Guidetti Sincro 415
Guidetti Sincro 415 utilized by Engineered Recycling Systems — compact cable and radiator granulator designed for efficient recovery of copper and aluminum, featuring shredding, turbo mill, zigzag separator, and dry separation table, with manual or automa
Guidetti Sincro 530
Guidetti Sincro 530 utilized by Engineered Recycling Systems — compact cable and radiator granulator designed for high-efficiency recovery of copper and aluminum, featuring turbo mill, zigzag separator, and dry separation table, with manual or automated f
Technical
Data
Length Width Height Weight Power Production
SINCRO
530 EKO
1600
mm

63.0''
2171
mm

85.5''
1350
mm

53.1''
1200
kg

2646
lb
16.8
kw

22.5
HP
400kg/h
SINCRO
215 EKO
1060
mm

41.7''
1515
mm

59.6''
810
mm

31.9''
360
kg

794 lb
3.6
kw

4.8 HP
65 kg/h
SINCRO
215 EKO
Single Phase
1060
mm

41.7''
1515
mm

59.6''
810
mm

31.9''
360
kg

794 lb
3.6
kw

4.8 HP
65 kg/h
SINCRO
315 EKO
1130
mm

44.5''
1565
mm

61.6''
1010
mm

39.8''
458
kg

1010
lb
6.1
kw

8.2
HP
130 kg/h
SINCRO
415 EKO
1350
mm

53.1''
2133
mm

84.0''
1350
mm

53.1''
950
kg

2094
lb
9.3
kw

12.5
HP
200 kg/h

Guidetti Sincro Eko Line

Copyright 2026. All Rights Reserved.
You are using an outdated browser. The website may not be displayed correctly.