Guidetti
Wire Pro
1000
Wire Pro Series Cable, Radiators and Cans in One Machine
The Guidetti Wire Pro Series is a range of three compact cable chopping systems that handle copper and aluminum cable, radiators and aluminum cans in one machine. All three are CE certified, soundproofed and filtered, and all three fit the same footprint. Engineered Recycling Systems supplies, installs and supports them from Atlanta.
The three models
All three measure 157 inches (4000 mm) long, 79 inches (2000 mm) wide and 79 inches (2000 mm) high. The Wire Pro 1000 weighs 6,390 lb (2,900 kg) and runs 40 HP (30 kW). The Wire Pro 2000 weighs 9,920 lb (4,500 kg) at 76 HP (57 kW). The Wire Pro 3000 weighs 14,550 lb (6,600 kg) at 137 HP (102 kW).
Throughput depends on material and configuration rather than on a single rated figure, which is the honest way to put it. What changes between the three models is installed power and how hard they can be driven, not the floor space they need.
Why the same footprint matters
A plant can step up from the 1000 to the 3000 without rebuilding the bay. The civils, the access and the extraction ducting stay where they are, and only the machine changes.
For an operation that expects its cable volumes to grow, that is worth more than a slightly better rate on day one. Most of what a line upgrade actually costs is the building work around it.
Cable, radiators and cans
Flexible and rigid copper or aluminum cable, radiators and composite scrap all go through the same machine. The output is clean separated metal ready for resale or refining, and a plastic fraction.
Radiator work is the part that earns this range its place. Copper and aluminum arrive joined, and splitting them on site is the difference between a graded product and a discounted mixed fraction.
Soundproofing and dust
Soundproofed housing and integrated dust filtration are built in rather than bolted on. That is what makes these systems workable inside a building with people around them, and it is usually what decides whether a plant can site the machine where it actually wants it.
It also keeps the plant on the right side of workplace noise and air limits without a separate enclosure, which is a real saving on a project of this size.
What feeds it and what follows
ERS builds the Wire Pro into complete chopping lines with pre-shredders, dosing conveyors, magnetic separation, air cyclones and dust extraction.
Heavy, armored or bundled cable goes through a pre-shredder first so the chopping stage is fed material it can take at rate. Behind the machine, a Reco Mill recovers fine copper from the tailings rather than letting it leave with the plastic.
Where it sits against the rest of the range
The Sincro Line and the Sincro Mill Line cover cable granulation in a wider spread of sizes, from the compact Sincro 415 up to the Sincro 950. The Wire Pro Series is the choice where radiators and mixed non-ferrous work are part of the daily mix rather than an occasional job.
Which machine a plant needs comes down to what arrives at the gate. That is a conversation about material, not about specification sheets.
Maintenance
Each unit has an extractable mill, which turns a blade change from a strip-down into a short job. Hinged panels and an operator-level control interface keep inspection straightforward.
Sealed bearings and reinforced housings suit continuous duty with minimal supervision. Blades and screens are consumables, and what they really cost is the time the line stands still while they are changed — which is why the extractable mill matters more than it sounds.
Options
Magnetic separators, dosing conveyors and dust collection can be specified with the machine so each installation matches the material stream rather than a standard package.
ERS configures those around the plant's own layout and material flow. A machine that fits the building and the feed will beat a better machine that fits neither.
How a project starts
With the material. ERS looks at what arrives, how it is constructed, what purity the buyer wants and the space available. Material can be run at the ERS test facility in Atlanta before anything is specified, which on radiator and mixed cable work settles arguments faster than any brochure.
Every machine ERS supplies is installed, commissioned and supported by ERS, with spare parts and service from Atlanta. The full Guidetti range and the wider copper wire and cable systems sit alongside it, within the ERS metals processing lineup.
Talk to ERS about what you are feeding and what purity you need to sell at.
| Technical Data |
Length | Width | Height | Weight | Power | Production |
|---|---|---|---|---|---|---|
| Wire Pro 3000 |
4000 mm 157.5'' |
2000 mm 78.7'' |
2000 mm 78.7'' |
6600 kg 14550 lb |
102.0 kw 136.7 HP |
(*) changeable according to the material processed kg/h |
| Wire Pro 1000 |
4000 mm 157.5'' |
2000 mm 78.7'' |
2000 mm 78.7'' |
2900 kg 6393 lb |
30.0 kw 40.2 HP |
(*) changeable according to the material processed kg/h |
| Wire Pro 2000 |
4000 mm 157.5'' |
2000 mm 78.7'' |
2000 mm 78.7'' |
4500 kg 9921 lb |
57.0 kw 76.4 HP |
(*) changeable according to the material processed kg/h |